Can single-side bopp adhesive tape adhere to fiberboard surfaces?

Yes, single-side bopp adhesive tape can usually adhere to the surface of fiberboard. Fiberboard (also known as density board or cardboard) is a type of board made by pressing wood fibers or other plant fibers, with a relatively flat surface and a certain degree of adsorption, which helps with the adhesion of adhesive tape.
The influencing factors of adhesion effect:
Surface smoothness: A smooth fiberboard surface can provide better adhesion. A rough or dusty surface may affect the adhesive performance of the tape.
Cleanliness: Ensure that the surface of the fiberboard is clean, dry, and free of dust and grease, which helps to enhance the adhesive effect of the tape.
Tape type: Single-side bopp adhesive tape usually uses acrylic adhesive or hot melt adhesive, which can provide good adhesion performance on the surface of fiberboard.
Suggested usage method:
Surface preparation: Before applying adhesive tape, ensure that the surface of the fiberboard is clean and dry, and remove any dust or impurities that may affect the adhesion effect.
Pressure application: Apply appropriate pressure when pasting adhesive tape to ensure a tight fit between the tape and the surface of the fiberboard, enhancing adhesion strength.
Test adhesion: If you have doubts about the adhesion effect, you can first test it on a small area to ensure that the tape can achieve the expected adhesion effect.
In general, single-side bopp adhesive tape has good adhesion performance on the surface of fiberboard and is suitable for various sealing, fixing, and packaging purposes. By proper surface preparation and proper usage methods, the good adhesion effect can be ensured.